01-22-2019, 10:03 AM
::edit:: Well... it seems that although I do support the S-Registers to change CR, LF, etc. I don't actually use the S-Reg value itself - it's still hard coded from the original firmware. I will look at changing that and updating the manual to show the various S-Registers.
Thanks for the feedback. I actually have ALL of the various functions (CR, LF, BEL, etc.) as standard Hayes variables like a real Hayes modem. You can change these with S-registers. See the manual for more details.
To change CR to 0x5F you would use this command:
ATS3=95<RETURN>
I have thought about the auto-connect feature. I will look into this.
Thanks for the feedback. I actually have ALL of the various functions (CR, LF, BEL, etc.) as standard Hayes variables like a real Hayes modem. You can change these with S-registers. See the manual for more details.
To change CR to 0x5F you would use this command:
ATS3=95<RETURN>
I have thought about the auto-connect feature. I will look into this.