11-25-2017, 08:20 AM
How are you powering the drive? If the drive does not appear in the software (only IMAGE or ADF is available) it means that the hardware can not find the floppy drive. This is usually from having no or improper power to the drive (especially 3.5" drives), or you made a change to the cable and possibly reversing the cable, which could have damaged the SuperCard Pro board. Loading/saving config only works with there is at least one drive found.
You do not select what type of disk drive you are using. It doesn't matter. You select the DISK TYPE, and that lets SuperCard Pro know what type of drive is being used. The only change you can make is when using 5.25" drives - whether you are using a 48 TPI or 96 TPI drive.
You do not select what type of disk drive you are using. It doesn't matter. You select the DISK TYPE, and that lets SuperCard Pro know what type of drive is being used. The only change you can make is when using 5.25" drives - whether you are using a 48 TPI or 96 TPI drive.