03-11-2017, 07:01 AM
Hi All
I've written a little loader for the 38k Commodoreserver driver.
It will load a 2400 baud driver (c64-up2400.ser) and set the neccesary settings on the Wimodem.
After this it will load the 38400 baud driver (v-1541.38k) , send the connection string (atdt commodoreserver.com:1541) to the Wimodem and then reset the C64.
At this point you can SYS 49152 and Load"$",2 as normal.
Download
If you have any questions or problems, let me know in this thread.
I've written a little loader for the 38k Commodoreserver driver.
It will load a 2400 baud driver (c64-up2400.ser) and set the neccesary settings on the Wimodem.
After this it will load the 38400 baud driver (v-1541.38k) , send the connection string (atdt commodoreserver.com:1541) to the Wimodem and then reset the C64.
At this point you can SYS 49152 and Load"$",2 as normal.
Download
If you have any questions or problems, let me know in this thread.