12-19-2013, 07:26 PM
Beta .90 adds W or B (word or byte) to the fill mode now depending on if you are in flux mode or MFM/GCR modes. Added new internal disk types to match the possible disk types shown in the flux image file specification. The Disk Type buttons will go away in the future, being replaced with a drop-down box with all of the support disk types.
Found a problem that requires a firmware upgrade! That problem is reading from the back side of a disk with the INDEX SENSOR/READ/IGNORE setting.
NOTICE! PLEASE UPGRADE YOUR SCP FIRMWARE TO THE LATEST VERSION (0.4). THIS VERSION FIXES A BUG IN THE BOARD'S RAM TEST FUNCTION AS WELL AS A BUG IN THE INDEX PULSE HANDLING.
Fixed problem with image files not having a "loading" message under the analyzer.
Fixed problem reported by LordCrass with 1.44MB image files not copying to disk or working correctly in the analzyer. It turns out that problem is with any image file exceeding 16MB in size.
Fixed window to front issue (again). This happens when I forget to swap panels during editing the display options.
Fixed flux to MFM decoder for 1.44MB disks.
Found a problem that requires a firmware upgrade! That problem is reading from the back side of a disk with the INDEX SENSOR/READ/IGNORE setting.
NOTICE! PLEASE UPGRADE YOUR SCP FIRMWARE TO THE LATEST VERSION (0.4). THIS VERSION FIXES A BUG IN THE BOARD'S RAM TEST FUNCTION AS WELL AS A BUG IN THE INDEX PULSE HANDLING.
Fixed problem with image files not having a "loading" message under the analyzer.
Fixed problem reported by LordCrass with 1.44MB image files not copying to disk or working correctly in the analzyer. It turns out that problem is with any image file exceeding 16MB in size.
Fixed window to front issue (again). This happens when I forget to swap panels during editing the display options.
Fixed flux to MFM decoder for 1.44MB disks.