Simple Flux Archive of all my Disks

[GeoKM]

Hi Jim,

Just got my new SCP, thanks. 8-)

I have the SCP connected to both a 3.5in floppy as drv 0 and a 5.25 96tpi drive at srv 1. Seems to all be working great 8-)

I am going to be Archiving all of my disks to Flux images over the next few months.
I have a about 300 Amiga Floppies, 60 C64/C128 Floppies and around 40 IBM PC Floppies to image. Around 30% are original Program Disks, the rest are Data or work disks or prog copies..

From reading through the forums I think i have worked out what I need to do is.

For original Software (Purchased) Disks of any of the Disk types, I should select INDEX Mode
For all my other disks written on my local machines I should use SPLICE mode set to 2 or 3 revolutions?

Is that correct?

Also couple of other questions if you don't mind

Why is there no selection for 1.2Mb IBM Floppy?
Do I need to do anything special when moving through the 4 different Commodore 8 bit type disks? That is I have 1541 SS, 1541 Notched Flippy's, 1571 DS, C64 CP/M Cart Disks) and C128 CPM Disks.

I have a few SFD 1001 disks too, what setting would you suggest for those?

Are there posts explaining what I am seeing with the Flux Display and Disk Layout pagers in the analyzer?

I apologize for all the questions, but its all new stuff to me. 8-)

Thanks so much for your help and a great product. 8-)