10-04-2015, 02:04 PM
(10-04-2015, 01:14 PM)SomeGuy Wrote: Anyway, HxC or the PCE Tools should be able to save the decoded data to an ImageDisk IMD file. Although HxC is likely to barf if the disk is "flippy" because it sees the back side as junk, and SCP doesn't want to read a single side only. There is a tool out there called "imd2atr.exe" that can then convert the IMD image to an Atari emulator .atr format.
Thanks for the help! I'll monkey around with the tools mentioned above. Looks like I need to get a DJGPP environment working to build imd2atr.
Jim's assessment would make *sense* (being that it's in with all the other Atari format source code disks and is labeled DD) and it's possible it was written with an XF551 drive which is why none of my 3rd party drives will read it.
Thanks again for the assistance.
-Clay