03-29-2014, 04:04 PM
I tried four different kinds of floppy connection cables (see the photo). Its a mixture of old and new cables - i think the chance is very smal, that all of them are unuseable. There are cables with two and cables with just one connector.
The power supply of the SCP is done by my desktop computer. I have 2 connector cables (see photos), one is a direct connector at the power supply unit and the second is a Y- Cable, connecting the 5.25" power connector to a small floppy one.
The floppy drive and the power connectors should be ok, because a 3.5" floppy drive works well if connected to the dektop PC (Motherboard Asus P5Q).
At none of my floppy drives are jumpers to set. At the SCP just one jumper is connected (J1), none else.
Any Idea how to check whats wrong?
Thanks!
The power supply of the SCP is done by my desktop computer. I have 2 connector cables (see photos), one is a direct connector at the power supply unit and the second is a Y- Cable, connecting the 5.25" power connector to a small floppy one.
The floppy drive and the power connectors should be ok, because a 3.5" floppy drive works well if connected to the dektop PC (Motherboard Asus P5Q).
At none of my floppy drives are jumpers to set. At the SCP just one jumper is connected (J1), none else.
Any Idea how to check whats wrong?
Thanks!