03-29-2014, 03:30 PM
What cable are you using to connect the floppy drive to the SCP? It sounds like the cable is bad. If you only have one drive, then you should only see one drive and the LED should be off on the drive after the floppy port is scanned. I have the same Sony drive and there are no issues using it. I don't have the Teac drive, but there should also be no issues. Are you powering the drive by using a PC power supply's floppy power connector?
A bad cable or incorrect jumpers are the only thing that can cause two drives to show up when there is only one drive.
A bad cable or incorrect jumpers are the only thing that can cause two drives to show up when there is only one drive.