So it has been a while and I wanted to update this thread. I now have GBBS working to full functionality and reliability. It was a challenge and I put it on the back burner for a while but it is 100% solved!
First and foremost up upgraded to GBBS 2.4
GBBS Settings
-----------------
Hayes V-Series 9600 (Option 11)
GBBS Option 2: DCD Carrier Detect
Initialization String: ATS0=1S2=128&C1&D2&S1&K0V0E0W0X1
Using Apple IIgs Modem Port Slot 2
Cable (The secret sauce)
------------------------------
I got a straight 8 pin din (all wired connected), cut one end off and used a breakout DB25 connector that plugs into the WiModem with no gender changing.
Cable Construction (My colors probably vary from yours)
---------------------------------------------------------------------
Mini Din 8 Male Actual Color DB25 Male Purpose
------------------- -------------- ------------- ----------
1 Black 4 and 20 HSKo to RTS and DTR
2 Brown 5 HSKi to CTS
3 Red 2 Serial Transmit Data Path
4 Orange 7 Signal Ground
5 Yellow 3 Serial Receive Data Path
6 Green None Unused TxD+. Leave isolated and insulated
7 Blue 8 GPi to modem DCD. Detects remote disconnects
8 Purple 7 RxD+ reference tied to signal ground
Shared connections Black must reach both DB25 pin 4 and pin 20, Orange and Purple must both reach DB25 pin 7
Apple IIgs Control Panel Settings
----------------------------------------
Slot 2 for modem port
9600 baud, 8 data bits, no parity, 1 stop bit
DCD Handshake: No
DSR/DTR Handshake: No
Using this I tested with connecting, logging off, disconnecting unexpectedly on the client, force logging a person off, rebooting and still works.
This is a dream, finally I can have my genuine Apple IIgs running my BBS as in my youth. Now to dust off my language reference and start some coding!
First and foremost up upgraded to GBBS 2.4
GBBS Settings
-----------------
Hayes V-Series 9600 (Option 11)
GBBS Option 2: DCD Carrier Detect
Initialization String: ATS0=1S2=128&C1&D2&S1&K0V0E0W0X1
Using Apple IIgs Modem Port Slot 2
Cable (The secret sauce)
------------------------------
I got a straight 8 pin din (all wired connected), cut one end off and used a breakout DB25 connector that plugs into the WiModem with no gender changing.
Cable Construction (My colors probably vary from yours)
---------------------------------------------------------------------
Mini Din 8 Male Actual Color DB25 Male Purpose
------------------- -------------- ------------- ----------
1 Black 4 and 20 HSKo to RTS and DTR
2 Brown 5 HSKi to CTS
3 Red 2 Serial Transmit Data Path
4 Orange 7 Signal Ground
5 Yellow 3 Serial Receive Data Path
6 Green None Unused TxD+. Leave isolated and insulated
7 Blue 8 GPi to modem DCD. Detects remote disconnects
8 Purple 7 RxD+ reference tied to signal ground
Shared connections Black must reach both DB25 pin 4 and pin 20, Orange and Purple must both reach DB25 pin 7
Apple IIgs Control Panel Settings
----------------------------------------
Slot 2 for modem port
9600 baud, 8 data bits, no parity, 1 stop bit
DCD Handshake: No
DSR/DTR Handshake: No
Using this I tested with connecting, logging off, disconnecting unexpectedly on the client, force logging a person off, rebooting and still works.
This is a dream, finally I can have my genuine Apple IIgs running my BBS as in my youth. Now to dust off my language reference and start some coding!

