Today, 03:01 AM
You probably should be sending AT&K1 if you are going to be using high baud rates on the Amiga. That turns on the hardware flow control so you don't overrun the Amiga.
Manuals for products can be found in two locations - in the info about the product itself (tab), and in the downloads section (pull-down menu in the header bar).
The WiModem232 uses DHCP, so whatever is serving that is responsible for getting the data to the WiModem232. You might have it pointed at something different, like with a PiHole.
Manuals for products can be found in two locations - in the info about the product itself (tab), and in the downloads section (pull-down menu in the header bar).
The WiModem232 uses DHCP, so whatever is serving that is responsible for getting the data to the WiModem232. You might have it pointed at something different, like with a PiHole.