10-02-2025, 09:10 AM
How are you powering the drive? Your board with that cable works perfect on my drives. The only difference would have to be power. If you are powering this via a USB port it could be that you are using a port that only has 100mA of current. The disk drives need 350mA startup current, so you would need a high powered USB port or a powered USB hub. I have only seen the issue you have reported when a disk drive or cable is bad, not bad power though.
Let me know how you are powering the drive (power source and cable).
Let me know how you are powering the drive (power source and cable).

