08-14-2025, 01:41 PM
This means that the floppy drive is not recognized by the SuperCard Pro board. If the drive is plugged in and powered on (with the power to the drive) then it should be recognized. If you plugged the drive cable in backwards it will destroy buffer chips and the drive will not show up in the list. Look at the HUEY and DUEY chips. If you see any type of burn marks or spots, then they are damaged and would need to be replaced. If you take a close up high resolution picture I can tell you for sure.
Maybe your cable is bad and your original drive was fine?
Maybe your cable is bad and your original drive was fine?