08-14-2025, 06:11 AM
THanks for you help Jim. My problem is that when I go to convert a disk I get only two options both at the "scource device and the target device" Those two options at both are Flux file or ADF file. As I mentioned in my e-mail to you, it's been years since I used the card due to floppy drives that I bought that failed so I put the card in storage. I converted half my amiga disks to image files when I first purchased your card, before the floppy drive gave up the ghost. I thought now was a good time to convert the remaining disks but it seems that the super card no longer works or I am doing something dumb that doesn't allow the card to function properly.