Trouble Imaging CP/M 5.25” SSSD Disks — No Flux Data Captured
#3
The data rate doesn't matter - it's not used for anything except for decoding. Your drive is not physically reading the disks. This is why you get red at the bottom like that - nothing is being returned (static), like the disk is not formatted.
Reply


Messages In This Thread
RE: Trouble Imaging CP/M 5.25” SSSD Disks — No Flux Data Captured - by admin - 07-18-2025, 08:32 PM



Users browsing this thread: 1 Guest(s)