12-25-2024, 07:30 AM
(12-25-2024, 07:17 AM)rosenrost Wrote: This morning at 1:12 a.m. CET it happened again. I just noticed it, but the LED still lights up yellow and the SSID is shown on the display. ATI showed that there is no connection. AT*REBOOT then reconnected the modem.
This means that the router side disconnected. If the Wimodem232 itself disconnects from the router then the LED will change to red. I did this on purpose to know when the router has deliberately disconnected. If you power off your router after a connection is established you will see the same thing.
You may have to use the STATIC IP option to prevent this from happening. You can't rely on the router to choose the exact same IP address when a lease renew occurs. You could also disable the renew option completely. In my system, I just reserved the the first 20 locations: 192.168.1.0-192.168.1.19 for my personal devices, such as the WiModem232, PiHole, etc. I set static IP addresses for these devices.