Okay so here's what's up: i'm trying to get a bbs running using the latest version of GBBS Pro (v2.3) at 2400 baud on my IIe with my WiModem232 Pro, and after some messing with the init string I was able to get it going using the string ATS0=1X1&C0&S0. I attempted to get it working with 9600 baud but was unable to and left the system alone for a few days, and when I came back to it I found i'm unable to get it working on 2400 baud at all. i'm able to connect to the wimodem, the screen on the wimodem itself shows it's connected, but the IIe freezes and when I close the connection the system remains frozen until I restart it. I've tried changing different settings on the wimodem, different init strings, doing a factory reset, reinstalling GBBS Pro from scratch but i'm still unable to get it going again and am at a bit of a loss of what to do next. Not sure if it will help but here are my wimodem settings:
B0 C0 E1 L0 M0 N0 Q0 V1 X1
S0:1 S1:0 S2:43 S3:13 S4:10 S5:8 S6:2 S7:99 S8:2 S9:6 S10:15 S11:90 S12:50 S25:0 S30:0 S37:6 S73:0
*B2400 *BL1024 *BT5 *C0 *CT1 *D1 *HO25 *L6969 *LED4 *P23 *R0 *T0
&C0 &D0 &G0 &K1 &Q0 &S1
B0 C0 E1 L0 M0 N0 Q0 V1 X1
S0:1 S1:0 S2:43 S3:13 S4:10 S5:8 S6:2 S7:99 S8:2 S9:6 S10:15 S11:90 S12:50 S25:0 S30:0 S37:6 S73:0
*B2400 *BL1024 *BT5 *C0 *CT1 *D1 *HO25 *L6969 *LED4 *P23 *R0 *T0
&C0 &D0 &G0 &K1 &Q0 &S1