01-30-2024, 01:03 PM
Putty doesn't support standard file transfer protocols (Zmodem, Xmodem, Ymodem, etc.)
You can transfer ANY type of file. I transfer files between my PC and Amiga just about every day because I am currently writing Amiga software on the PC and testing it on real hardware.
Just make sure that you are using the same translation at both ends. Some PC terminals will default to Telnet for the connection protocol (which is different from a file transfer protocol). I use RAW mode because otherwise a translation is required which slows down file transfers. So in something like ZOC8 you need to set the mode to RAW. If you don't use RAW then you would need to switch the WiModem232 Pro to use Telnet translation (AT*T1 to turn translation on).
You can transfer ANY type of file. I transfer files between my PC and Amiga just about every day because I am currently writing Amiga software on the PC and testing it on real hardware.
Just make sure that you are using the same translation at both ends. Some PC terminals will default to Telnet for the connection protocol (which is different from a file transfer protocol). I use RAW mode because otherwise a translation is required which slows down file transfers. So in something like ZOC8 you need to set the mode to RAW. If you don't use RAW then you would need to switch the WiModem232 Pro to use Telnet translation (AT*T1 to turn translation on).