Flashing new firmware - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: ICS64 (https://www.cbmstuff.com/forum/forumdisplay.php?fid=130) +---- Forum: Firmware (https://www.cbmstuff.com/forum/forumdisplay.php?fid=136) +---- Thread: Flashing new firmware (/showthread.php?tid=808) |
Flashing new firmware - admin - 03-20-2021 The ICS64S uses a standard SERIAL connection (Rx/Tx/VCC/GND), making it compatible with CP2102 and FTDI USB to serial interfaces. The flashing software will use a COM port. RE: Flashing new firmware - dwestbury - 10-18-2021 A couple questions: 1. Where is the most current firmware available from? 2. Is it open source? 3. What firmware flash utility should be used? Thanks! RE: Flashing new firmware - admin - 10-18-2021 There is no firmware currently available as it has not changed at this point. No, it is not open source. I have a flash and settings changer program for the PC. I will put together an archive shortly. |