+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: WiModem232 / WiModem232 Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=79)
+---- Forum: Usage (https://www.cbmstuff.com/forum/forumdisplay.php?fid=81)
+---- Thread: v2.93 firmware notice (/showthread.php?tid=562)
v2.93 firmware notice - admin - 08-15-2018
If you recently received a WiModem232 and you can't get anything to connect, go take a look at the network type using ATI4. If you see the network set as STATIC (and you didn't deliberately do that), you need to enter:
AT*NET=DHCP<RETURN>
There is a "bug" in the factory defaults that sets the network type to be STATIC instead of DHCP on a reset. I will fix that in the next firmware update.