The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.28 (Linux)
|
Possible Bug - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: WiModem232 / WiModem232 Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=79) +---- Forum: Usage (https://www.cbmstuff.com/forum/forumdisplay.php?fid=81) +---- Thread: Possible Bug (/showthread.php?tid=433) Pages:
1
2
|
RE: Possible Bug - admin - 12-31-2017 Yes, I have run it at 2400 baud using the built-in terminal. Scratch that, I used a terminal program that's on one of my 3.5" external drives. I did test it with the internal terminal, but I think it requires flow control, Xon/Xoff (which is not currently supported). What init string are you using? RE: Possible Bug - rlauzon - 01-03-2018 (12-31-2017, 05:40 PM)admin Wrote: Yes, I have run it at 2400 baud using the built-in terminal. Scratch that, I used a terminal program that's on one of my 3.5" external drives. I did test it with the internal terminal, but I think it requires flow control, Xon/Xoff (which is not currently supported). What init string are you using? I'm using "48N1D" right now. Which should turn off XOn/XOff. I did try "48N1E" as well with no success. The cable that I'm using may be the problem. So I will look at replacing that and see what happens. The cable is really just to change the gender (since my T102 is female port). |