Full Version: SCP Serial port support added!
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Both SCP serial ports have been activated with v1.0 of the firmware.  The default baud rate of the RS232-1 port is 250Kbps, and the default baud rate of RS232-2 port is 9600 baud.  You can of course change the baud rate to anything between 300 baud and 1.25 megabaud.  Changes to the baud are non-volatile, so a reset of the board will restore the default baud rates.  If anyone thinks that either of these should default to a lower baud rate, please let me know.