04-23-2020, 01:47 PM
(This post was last modified: 04-23-2020, 01:47 PM by bikeguychicago.)
I just purchased the WiModem232 and I'm trying to use it with the modem port built into the machine. I have the WiModem232 connected to a DIN-8 -> 25PIN serial cable on the modem port. When trying to connect to the modem using ProTerm, the modem is not recognized.
I fiddled around with the control panel settings and the modem settings in the terminal app and I still can't get it to be recognized.
If anyone has some suggestions as to what I should check and/or try, please let me know.
Thank you!
Keith Sheehan
I fiddled around with the control panel settings and the modem settings in the terminal app and I still can't get it to be recognized.
If anyone has some suggestions as to what I should check and/or try, please let me know.
Thank you!
Keith Sheehan