1541 installation
#1
So, it seems that the diagrams for the installation of the cable version of the Supercard+ are not real clear, so I am providing some pictures.

Remove the 6502 from it's socket in the 1541 drive and place it on the Supercard+ board with the notch facing the nearest edge of the board.  Plug the cable end into the 6502 socket with the notch facing towards the back the drive.  Tuck the Supercard+ into the slot between the metal chassis and the plastic case, with the solder side of the board touching the plastic.  Fold the cable over as shown.  That's it!


Attached Files Thumbnail(s)
                   
Reply




Users browsing this thread: 1 Guest(s)