Sorry, that was a typo. Setting &D2 does not hang up the modem when DTR is lowered.
In fact, with the following setup it hangs up immediately upon connect (the following is a direct cut and paste from ZTerm):
AT&V
C0 E1 L0 M0 N0 Q0 V1 X1 S0:0 S1:0 S2:43 S3:13 S4:10 S5:8 S6:2 S7:60 S8:2 S9:6 S10
:15 S11:90 S12:50 S25:0 S30:30 S37:6 *B9600 *BL512 *C0 *D0 *L6400 *LED2 *P1541 *R
0 *T0 &C1 &D2 &K0 &Q2 &S0
For instance:
AT&D2
OK
ATDT A80SAPPLEIIBBS.DDNS.NET:6502
CONNECT 9600
NO CARRIER
I'm starting to think this WiModem232 has some sort of defect.
Or am I initializing it improperly?
In fact, with the following setup it hangs up immediately upon connect (the following is a direct cut and paste from ZTerm):
AT&V
C0 E1 L0 M0 N0 Q0 V1 X1 S0:0 S1:0 S2:43 S3:13 S4:10 S5:8 S6:2 S7:60 S8:2 S9:6 S10
:15 S11:90 S12:50 S25:0 S30:30 S37:6 *B9600 *BL512 *C0 *D0 *L6400 *LED2 *P1541 *R
0 *T0 &C1 &D2 &K0 &Q2 &S0
For instance:
AT&D2
OK
ATDT A80SAPPLEIIBBS.DDNS.NET:6502
CONNECT 9600
NO CARRIER
I'm starting to think this WiModem232 has some sort of defect.
Or am I initializing it improperly?