02-12-2018, 11:22 PM
Starting with v2.70 firmware DSR is controlled by &S. If you use &S1 or &S2, DSR follows the state of the connection (goes high when connected, and goes low when the connection is dropped). You MUST have the DTR/DSR trace cut and jumper IN to DTR and OUT to DSR for &D and &S features to work.
As soon as my Apple //e arrives, I will have a way to test all of these (besides on my Amiga, which works perfectly).
As soon as my Apple //e arrives, I will have a way to test all of these (besides on my Amiga, which works perfectly).