I'd like to ask about some more behaviours, specifically the handling of DTR and DSR in order to get the WiModem232 to work properly with GBBS during hangup or lost call (remote disconnect) situations.
If the host computer drops its DTR signal, I'd like the WiModem232 hang up the call.
This is usually controlled by AT&Q0D2
Likewise, the remote connection closes or disconnects I'd like the WiModem232 to drop its DSR signal until
This, is (as far as I understand it)controlled by AT&S1 while Q0 is in effect.
Sadly, neither of these features are supported. And using the ATI1 command doesn't ever show the status of the DSR or DTR signal.
:-(
If the host computer drops its DTR signal, I'd like the WiModem232 hang up the call.
This is usually controlled by AT&Q0D2
Likewise, the remote connection closes or disconnects I'd like the WiModem232 to drop its DSR signal until
This, is (as far as I understand it)controlled by AT&S1 while Q0 is in effect.
Sadly, neither of these features are supported. And using the ATI1 command doesn't ever show the status of the DSR or DTR signal.
:-(