10-06-2019, 10:19 AM
(10-06-2019, 12:30 AM)admin Wrote: Sounds like you have the DS0-DS2 jumpers wrong or are using a cable that doesn't have a "twist" in it. That commonly results in the LED being coming on incorrectly.
Have you swapped drives to verify that the disk drive actually works in the drive 1 position?
I tried taking the 5.25" drive off the cable and moving the 3.5" drive to the second connector on the cable (after the twist) I haven't tried leaving it in the first position with no 5.25" drive or swapping the drives, though. I might try that next.