01-22-2019, 12:19 PM
(01-22-2019, 10:03 AM)admin Wrote: ::edit:: Well... it seems that although I do support the S-Registers to change CR, LF, etc. I don't actually use the S-Reg value itself - it's still hard coded from the original firmware. I will look at changing that and updating the manual to show the various S-Registers.
Thats great, it's good to be able to change these things. The only thing I would add is that by supporting both rather than one or the other means that the modem can be configured with normal terminal software or videotex client without a change. Could I politely suggest that an 'ALT CR' S register be added and checked for so that an alternative CR can be supported.
I am the developer of TELSTAR and always recommend your modem as one of the solutions. To be able to configure the device from either comms client without a change would be awesome.
Like I said, just a suggestion. Keep up the good work.