Dragon's Lair
#3
(11-04-2017, 08:31 PM)admin Wrote: No, that's the way to duplicate it.  This is one of the rare disks that is not index aligned.  Have you tried using the media integrity test to make sure that the disks you are copying to are good?

Yes, the media test says that the disk i am using is fine.  I have cleaned the drive heads as well just in case.  The disk I write still does not boot.

Do I need to change any of the other settings under the menu items such as Index Sensor->Writes?  The drive settings are all defaults.

I have also tried the disk in two Atari STs. An STFM with TOS 1.02 and an STE with TOS 2.06.

The SCP dump loads fine in the Steem SSE emulator.
Reply


Messages In This Thread
Dragon's Lair - by kodak80 - 11-04-2017, 07:58 PM
RE: Dragon's Lair - by admin - 11-04-2017, 08:31 PM
RE: Dragon's Lair - by kodak80 - 11-04-2017, 09:00 PM
RE: Dragon's Lair - by admin - 11-05-2017, 02:21 PM
RE: Dragon's Lair - by kodak80 - 11-06-2017, 03:09 AM
RE: Dragon's Lair - by kodak80 - 02-17-2018, 11:32 PM
RE: Dragon's Lair - by admin - 02-18-2018, 10:13 AM



Users browsing this thread: 1 Guest(s)