02-24-2017, 06:37 PM
Have a setup with google wifi's mesh router (Very very nice - with almost no advanced controls which right now I am very much missing)
Sadly it does not support push to setup (wps)
It only supports WPA2 PSK as far as I can determine.
From Strike term or CCGS I can communicate with the modem fine
ATI shows the proper ssid
I perform a AT*NS0,<password> (No special chars - I have changed pw to all lower case and all alpha for testing purposes)
I get 'no router located' as a return message, yet the SSID updates in ATI to reflect the chosen SSID
Wish there was a way to get the actual error message - but if I was going to guess I'm thinking it's failing to authenticate with the router.
Any suggestions on what I might do or try next?
Muchas!
Brian
Sadly it does not support push to setup (wps)
It only supports WPA2 PSK as far as I can determine.
From Strike term or CCGS I can communicate with the modem fine
ATI shows the proper ssid
I perform a AT*NS0,<password> (No special chars - I have changed pw to all lower case and all alpha for testing purposes)
I get 'no router located' as a return message, yet the SSID updates in ATI to reflect the chosen SSID
Wish there was a way to get the actual error message - but if I was going to guess I'm thinking it's failing to authenticate with the router.
Any suggestions on what I might do or try next?
Muchas!
Brian