Posts: 8
Threads: 1
Joined: Jan 2016
Posts: 2,811
Threads: 148
Joined: Nov 2013
What disks are you trying to image? If they are commercial, you should be using INDEX mode. Otherwise, data disks have to be copied/imaged with SPLICE mode.
Posts: 8
Threads: 1
Joined: Jan 2016
(03-02-2019, 12:50 AM)admin Wrote: What disks are you trying to image? If they are commercial, you should be using INDEX mode. Otherwise, data disks have to be copied/imaged with SPLICE mode.
Thanks for the reply, they are commercial, orignal disks.
I can backup most of them with nibtools etc, but have never mamaged to get a single working image from SCP.
It must be something I am doing wrong, or my card is dead?!
Posts: 2,811
Threads: 148
Joined: Nov 2013
Good question. Run the media test in the Disk Utilities Menu. That will read/write to a disk and test the drive and SCP hardware. It could be something as simple as your disk drive heads are dirty.
You can make an image file (.scp) of a disk using INDEX mode and send it to me (data @ cbmstuff.com). I can look at the image file and tell you what is wrong.
Posts: 8
Threads: 1
Joined: Jan 2016
(03-03-2019, 08:53 PM)admin Wrote: Good question. Run the media test in the Disk Utilities Menu. That will read/write to a disk and test the drive and SCP hardware. It could be something as simple as your disk drive heads are dirty.
You can make an image file (.scp) of a disk using INDEX mode and send it to me (data @ cbmstuff.com). I can look at the image file and tell you what is wrong.
OK, I will do that and send you an image.
Thank you.
Posts: 8
Threads: 1
Joined: Jan 2016
03-04-2019, 08:18 PM
Image sent as requested
Posts: 8
Threads: 1
Joined: Jan 2016
(03-04-2019, 02:26 PM)Draven Wrote: (03-03-2019, 08:53 PM)admin Wrote: Good question. Run the media test in the Disk Utilities Menu. That will read/write to a disk and test the drive and SCP hardware. It could be something as simple as your disk drive heads are dirty.
You can make an image file (.scp) of a disk using INDEX mode and send it to me (data @ cbmstuff.com). I can look at the image file and tell you what is wrong.
OK, I will do that and send you an image.
Thank you.
More images sent for evaluation.
Posts: 2,811
Threads: 148
Joined: Nov 2013
Yep, your SuperCard Pro is bad. Take a hires picture of the board - in particular of the area with the Huey and Duey chips. I am guessing that you plugged the cable in backwards (probably to the disk drive) at some point and damaged Huey.
Posts: 8
Threads: 1
Joined: Jan 2016
Jim,
Now that I have a replacement Huey (R.I.P.), I am still having issues.
I will send a new flux image for you to take a look at.
It is of a known working disk that I am able to sucessfully image with KF.
John
Posts: 2,811
Threads: 148
Joined: Nov 2013
Got your image. It is not indexed so you would have to use SPLICE mode. It also appears as at least partially corrupted. What disk is this?