Disk Copier/Imager: Target Drive do not offer any Imagefile option - Printable Version +- CBMSTUFF FORUM (https://www.cbmstuff.com/forum) +-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1) +--- Forum: SuperCard Pro (https://www.cbmstuff.com/forum/forumdisplay.php?fid=3) +---- Forum: Installation and setup (https://www.cbmstuff.com/forum/forumdisplay.php?fid=5) +---- Thread: Disk Copier/Imager: Target Drive do not offer any Imagefile option (/showthread.php?tid=252) |
Disk Copier/Imager: Target Drive do not offer any Imagefile option - frank128 - 11-06-2015 I had the idea to save a 1,44 MB DOS floppy 3,5" disk to an image (e.g. Flux Image). I thought the SCP Disk Copier/Imager is the right tool for it. But it looks the SCP Disk Copier/Imager on my system will only copy floppy-disks or write a floppy-disk based on a Flux Image. Source Device:
Target device:
Target Drive do not offer any Imagefile option for IBM Formats. It offers the image option only for the Disk Types:
Why? RE: Disk Copier/Imager: Target Drive do not offer any Imagefile option - admin - 11-06-2015 Correct. The SuperCard Pro is designed for making copies and flux images of disks, not converting to other image file formats (for emulators). If you want to convert to a .scp image file to .dsk, .img, etc. you can do that with the HxC Floppy Drive Emulator software. That tool will convert to/from .scp and numerous different image formats. Then you can use the converted image file with emulators. What emulator are you trying to make an image for? RE: Disk Copier/Imager: Target Drive do not offer any Imagefile option - frank128 - 11-06-2015 (11-06-2015, 11:33 AM)admin Wrote: The SuperCard Pro is designed for making copies and flux images of disks I wrote in my entry post: Quote:I had the idea to save a 1,44 MB DOS floppy 3,5" disk to an image (e.g. Flux Image). Your software do not gave me this option. Why? (11-06-2015, 11:33 AM)admin Wrote: If you want to convert to a .scp image file to .dsk, .img, etc. you can do that with the HxC Floppy Drive Emulator software. To do this, I need first the .scp image. And under "Target Drive" there is no option to generate a .scp file. Maybe a problem because I have connected two FDD to SCP? accordingly to the SCP manual this setting should be no problem. Supercard Pro (Drive 0) = 5,25" NEC FD1157C Supercard Pro (Drive 1) = 3,5" FDD (1,44 MB) The SCP Drive/Disk Utilities have ho problems with the two different FDD. RE: Disk Copier/Imager: Target Drive do not offer any Imagefile option - admin - 11-06-2015 I will have to look at the software. Most people only use a single drive (as do I), and the .scp image option is there. |