03-14-2023, 12:22 AM
Yeah, that makes sense. I will make a change to the firmware so that when the settings are loaded and the buffer is greater than the max allowed now, it sets it to be the max allowed. That will solve this in the future. However, I almost removed this feature as it's really not needed anymore. I have it in place for testing. I can issue ATI3 and see if any of the incoming blocks of data exceeded the current buffer limit. This was letting me know really where the threshold was for high speed (230.4Kbps) data transfers. So, I could just remove the feature then I would not have to check the settings when loaded.