Gotcha. Makes perfect sense. This should have all bases covered.
So far, my tests have been successful. I set S73 to a low number
and it's worked every time. I gotta tell you though, I was starting
to think that Express was the unkillable software from Hades.
I ran the first test, setting S73 to 7 (7 minutes). I downloaded a
file and let it set there...7 mins....8 mins... 9....all the way through
15 minutes. I gave up, ended the call and rechecked the WiModem
232. AT&V showed the S73 register at 99 - where I had it before I
changed it and ran the test. The only thing I didn't do was an AT&W
and save it. I did that and that time it worked. Not sure why changing
it but not saving and then running Express would do that. I did not
cycle the WiModem232's power or reboot the ST computer. <shrugs>
The important thing is, with the S73 register saved, it works! ! !
BTW, it makes perfect sense why the S30 register wasn't working when
a user goes AWOL after a download. Express keeps sending "Press
<return> Please, over and over, something like every 5-10 seconds. I
don't know why I wasn't thinking about that.
Anyway, Skoal! Success! Job well done and thank you so much.