Kaypro II - Boot Floppy

[ldkraemer]

Jim,
I've used my Supercard Pro to copy a fresh formatted and rebuilt boot Floppy.
The floppy boots fine on my Kaypro II, so I copied it as a CP?m Floppy with my
Supercard Pro (using indexed).  I then write the *.SCP file back to a fresh floppy
and it does not boot on the Kaypro II.

I can not attached the scp.zip file because it is too large.  How can I get it sent to you?  The Floppy Definiitions
for the Kaypro II are:

BEGIN KAY1  Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
DENSITY MFM LOW
CYLINDERS 40 SIDES 1 SECTORS 10 512 SKEW 4
SIDE1 0 0,1,2,3,4,5,6,7,8,9
BSH 3 BLM 7 EXM 0 DSM 194 DRM 63 AL0 0F0H AL1 0 OFS 1
END

# KAY1  Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
diskdef kay1
  seclen 512
  tracks 40
  sectrk 10
  secbase 0
  blocksize 1024
  maxdir 64
  dirblks 2
  skew 1
  boottrk 1
  os 2.2
end

# libdsk data below
[kay1]
description = KAY1  Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
cylinders = 40
heads = 1
secsize = 512
sectors = 10
secbase = 0
datarate = DD


Thanks.

Larry

[admin]

You can send your image files to data @ cbmstuff.com