02-22-2021, 07:12 PM
Yes, it should be possible The USER PORT on my Super Expansion Board and Multi Expansion Board have these pins available.
This is the information on the required pins.
https://github.com/dwhinham/mt32-pi/wiki...connection
The pinout of the SEB and MEB are available their respective manuals. You would just need to make a cable with a 0.100" spacing to the MT32-PI board.
This is the information on the required pins.
https://github.com/dwhinham/mt32-pi/wiki...connection
The pinout of the SEB and MEB are available their respective manuals. You would just need to make a cable with a 0.100" spacing to the MT32-PI board.