10-02-2022, 02:18 PM
Hi--I have a JU-475-4 as well. I made sure that the GX jumper was not installed. Could someone please provide a longer explanation of the function of this jumper -- just for my own understanding. For starters, what is a "write gate"?
A friend installed a toggle switch across the pins of the EX jumper. Do I understand correctly that this jumper controls whether the index hole sensor is active?
If so, does closing the switch (same as installing the jumper) activate the sensor?
If Yes, then I think that means that I should have the switch in the closed position when I use Index mode in SCP. Yes?
Thanks.
A friend installed a toggle switch across the pins of the EX jumper. Do I understand correctly that this jumper controls whether the index hole sensor is active?
If so, does closing the switch (same as installing the jumper) activate the sensor?
If Yes, then I think that means that I should have the switch in the closed position when I use Index mode in SCP. Yes?
Thanks.