WHD Program

[armitage]

Tried whd for the first time today and I'm having the same issues as the others. 9600 baud, at&k1 set, directory works in CCGMS, but when I start the whd wedge and load"$",7 it freezes on "Loading. I tried it with JiffyDOS enabled and disabled on both my NTSC breadbin and flat 128. Running latest WiModem firmware. Tried an at&f just to see if that would make a difference but got the same result.

[admin]

Hmm... I will look into it.

[admin]

Update to the latest (v4.00) firmware and use the latest WHD. I have fixed all of the little issues. Now you can leave your WiModem in 2400 baud mode and WHD will automatically switch it to 9600 baud and run correctly.

[pcollins]

Only NTSC, right?

[admin]

No, it should handle both NTSC and PAL. Although, I have not tested it with PAL I do have the timing set for PAL systems. If you have a PAL setup, please test it and let me know! Thanks!

[admin]

Yes, the UP9600 hack is required as the WHD program runs only at 9600 baud. At some point I will enable the 38400 baud support that I have been working on.

[ZippyZapp]

Yes, the UP9600 hack is required as the WHD program runs only at 9600 baud. At some point I will enable the 38400 baud support that I have been working on.

Cool. Looking forward to that. I am glad new stuff for the WiModem is still being worked on.