Floppy 4 pin female to 4 pin female

[videofx]

Does anyone know where I can buy a Floppy 4 pin female to floppy 4 pin female so I can get power from the Super Card Pro? Or do I need to make one myself? I searched everywhere and can't find the cable.

Thanks!

[admin]

I have something that will work. They just arrived. You can buy them on eBay too. Look for a 3.5" splitter. This has a 4 pin Molex connector (what a 5.25" drive normally uses) with two sets of Berg connectors for 3.5" floppy drives. You just use both Berg connectors, one plugged into the SuperCard Pro's 3.5" floppy power output, and the other end is plugged into your 3.5" disk drive.

[videofx]

You just use both Berg connectors, one plugged into the SuperCard Pro's 3.5" floppy power output, and the other end is plugged into your 3.5" disk drive.

DUH, I forgot about that. I have 3 of these as I use them to supply power in my Amiga 4000 to my CF cards connected to my Flyer.

Thanks for the wake up!