Manual and the AT*SSID command

[Montezuma]

The space between AT*SSID and the parameters seems to cause a problem.
The Wimodem232 manual says:


"To manually setup the SSID you would enter the following into your terminal
program:

AT*SSID [name][,passphrase]{RETURN}

Using the above example, if you wanted to setup the WiModem232 to use
the router with the name of NETGEAR24 (which has a passphrase of
WiModem1) you would enter the following into your terminal program:

AT*SSID NETGEAR24,WiModem1{RETURN}"

I think it should be:

Code:

AT*SSID[name][,passphrase]{RETURN}

and

Code:

AT*SSIDNETGEAR24,WiModem1{RETURN}