Missing characters on throughput
#9
The WiModem can stream (either direction) continuously forever.  Otherwise uploads and downloads would never work.

Check something for me.  In ProTerm go to terminal mode and type AT&K?  and tell me what the result is.  It has to be 1 for flow control to be enabled.  BBS's are typically very slow, except when uploads/downloads are going on.  So, I guess if the CPU was fast enough and there wasn't much overhead with display handling you might be able to handle normal BBS browsing without seeing dropped characters, especially when a real UART is present (like the SSC).

The WiModem does have a command for changing the internal buffer size before CTS is asserted:

AT*BL[x] – Set buffer limit [limit]

This command will set the buffer limit used before CTS is asserted. Default is 512, with a range of 64 to 1460.
Reply


Messages In This Thread
Missing characters on throughput - by Baldrick - 11-21-2018, 10:01 AM
RE: Missing characters on throughput - by admin - 11-21-2018, 03:45 PM
RE: Missing characters on throughput - by admin - 11-21-2018, 05:33 PM
RE: Missing characters on throughput - by admin - 11-27-2018, 12:03 AM
RE: Missing characters on throughput - by admin - 11-29-2018, 12:46 PM
RE: Missing characters on throughput - by admin - 01-25-2019, 02:23 PM



Users browsing this thread: 1 Guest(s)