09-26-2018, 07:09 PM
(This post was last modified: 09-26-2018, 07:10 PM by JackCassidy.)
(09-26-2018, 06:30 PM)admin Wrote: Are you plugging the WiModem232 directly into the SCC or are you using a cable connected between them?
ADT should not work at all with the dip switch settings shown in the picture. ADT also requires a NULL modem cable, which will not work with the WiModem232. Just like a real modem you must use a modem cable, which is not the same as a NULL modem cable.
Are you selecting a 300 baud modem driver?
Plugged directly into the SSC with the gender changer. I've tried every 300 baud option available in ProTerm.
I have the card set exactly like in the pictures on the usage thread