Cannot Connect to WiFi, No Router Located?

[John_Newcombe]

Are you using ANSCII mode for your terminal program?  You should be seeing capital letters when you are typing.  As stated in the manual, you can’t be in a “graphics” mode when you are entering a SSID and password.  With CCGMS you need to toggle mode to ANSCII.

This error has been driving me nuts for ages, however, it seems that for me at least the problem has been with the Manual. In the example at the begining of the manual it suggests the format "AT*SSID NETGEAR24,WiModem1" should work however, in my case including the space between 'SSID' and the SSID name causes 'No Router Located' errors. using the format "AT*SSIDNETGEAR24,WiModem1" works fine. The section of the manual that describes AT*SSID seems correct in that there is no space.

I hope this helps.