09-16-2018, 09:02 AM
MAKE SURE you are using a terminal program in ANSCII or ASCII only mode. If you are using a CBM graphics mode you can not enter the password with the correct case (upper and lower will be inverted). I would recommend using CCGMS and pressing F8 to change to ANSCI mode. At that point you can enter the ssid name and password correctly. You will no if you are in the proper mode because when you do a ATI the text will come out looking correct, with the upper/lower case being correct (first letter capitalized).
Each WiModem is connected to my router (which is AES protected) for programming it, so every one of them is hand tested prior to shipping.
Each WiModem is connected to my router (which is AES protected) for programming it, so every one of them is hand tested prior to shipping.