08-22-2018, 04:39 PM
(08-07-2018, 10:24 PM)admin Wrote: You can go back to the previous version using AT*DOWNGRADE, but it is unlikely this will fix the issue. This is a common periodic problem with Q-Lonk.
When I connect to Q-link using ATDT 5551212 in a terminal program, the WiModem OLED indicates that it is connected to Q-link. When I try with the Q-Link software, it never connects and OLED status never changes.
I downgraded and that did not work. I upgraded back to 2.94 and that doesn't work either. I will try an unvalidated Q-Link disk image and see if that works.