02-11-2018, 10:37 PM
Good news!!! I got it to work. It was a combination of three things. The serial port I was using was bad, the com port cable from the motherboard was bad, didn't set the IRQ for the com port in Windows 3.11 and Qmodem doesn't recognize off IRQs for comm ports. Downloaded BananaCom, set the motherboard for com3 IRQ11 and it picked it up just fine.
Thanks for your time.
BTW... Is it possible to order the OLED display after the fact and solder it on?
Thanks for your time.
BTW... Is it possible to order the OLED display after the fact and solder it on?