01-24-2018, 11:19 AM
You shouldn't need any handshaking until you reach 9600 baud (at least that is my experience with all of the systems I have). I know that people are using 9600 baud with their Apple IIc and IIgs systems with just the standard cable. You can NOT use a null modem cable. You have to use a standard DTE->DCE (modem) cable.
If you want to use DTR/DSR in place of RTS/CTS, cut all three jumpers and solder exactly as shown in the manual.
What terminal program are you using? It's likely that you have something set incorrectly.
If you want to use DTR/DSR in place of RTS/CTS, cut all three jumpers and solder exactly as shown in the manual.
What terminal program are you using? It's likely that you have something set incorrectly.