WiModem232 Pro History

[admin]

To update the firmware of your WiModem232 Pro, connect to the internet via your router, launch a terminal program and type:

AT*UPDATE<RETURN>


***************************************************************************************

01/10/24 - v1.00

• First release
  

 ------------------------------------------------------------------------------------------------------

 01/23/24 - v1.01

• Added notifier to display when unit is not initialized.
  

 ------------------------------------------------------------------------------------------------------

 02/04/24 - v1.02

• Removed "READY" from display status when EEPROM CORRUPTED message is shown and WIFI user name and password have been set.
  
  

 ------------------------------------------------------------------------------------------------------

 02/06/24 - v1.10

• Reverted back to v1.00 code and changed how READY is displayed when the NVS is corrupted after the router user name and password have been set.
  

  ------------------------------------------------------------------------------------------------------

 03/19/24 - v1.20

• Changed method used for storing SSID and password.  This now allows using the CABLE (NULL modem)  mode without losing the last stored SSID and password information.  This change requires that everyone re-enter their SSID and password for this verison firmware.
  
• Pressing the button while connected will immediately disconnect the call.
  
• Pressing the button right after power-on will bypass the boot screen.
  

------------------------------------------------------------------------------------------------------