Buffering capability
#6
I guess it depends on the speed of the computer. Something like an Amiga 1200 doesn't need flow control even at 57600 baud. However, some retro machines need flow control at anything over 1200 baud.

Remember that RTS/CTS flow control is the default jumpered setting (along with DTR/DSR tied together). If you need DTR or DSR for flow control, then you would need to cut the 3 traces and jumper as necessary for your system. Most of the time, this is only needed for old printers. DTR/DSR was sometimes used to hang up the connection.
Reply


Messages In This Thread
Buffering capability - by Beery Miller - 01-12-2018, 10:50 AM
RE: Buffering capability - by admin - 01-12-2018, 12:35 PM
RE: Buffering capability - by Beery Miller - 01-12-2018, 06:49 PM
RE: Buffering capability - by admin - 01-12-2018, 07:11 PM
RE: Buffering capability - by Beery Miller - 01-13-2018, 05:15 PM
RE: Buffering capability - by admin - 01-13-2018, 05:26 PM



Users browsing this thread: 1 Guest(s)