Computers successfully tested with WiModem232
#17
(01-28-2018, 09:38 PM)admin Wrote: You can NOT use 8 data with 2 stop bits. That is definitely wrong! Only 8 data bits, no parity, and 1 stop bit are possible with the WiModem232 hardware.

Many of the dip-switch settings can be overridden by a terminal program. I am fairly confident that all of the typical settings (speed/databits/stopbits/parity) set at the dip-switches are ignored by every terminal program. In fact, we simply wouldn't be able to use any A2 terminal program if we had setup 8,N,2. It just wouldn't work at all.
Reply


Messages In This Thread
RE: Computers successfully tested with WiModem232 - by utcv - 01-29-2018, 07:23 PM



Users browsing this thread: 1 Guest(s)